What Is Packaging Automation?
Packaging automation refers to carrying out operations such as product transfer, sorting, grouping, wrapping, case packing, labeling and palletizing through machinery and control systems.
The product type, production output, pack format, plant layout and shipping method determine the equipment required and the way the packaging line should operate.
Packpark® evaluates the product flow between the production line and the packaging operation to define the required equipment, line capacity and system structure.
Planning
R&D / Design
Production
FAT & Installation
Why Should Production and Packaging Be Planned Together?
A high-capacity production line alone is not enough. If the packaging line cannot keep pace with production output, products begin to accumulate before packaging.
This may require products to be moved to temporary areas, handled again and fed back into the packaging process. As a result, intermediate stock, additional labor and unnecessary product movement may occur. Delays in packaging can slow down production and, in some cases, cause the production line to stop.
For this reason, we configure packaging capacity according to production output and keep products moving in a controlled flow from production into packaging, storage or dispatch.
Which Packaging Operations Can Be Automated?
The equipment used in a packaging line is determined by the product, production speed, pack format and shipping method.
A project may include one or several of the following operations:
-
Product transfer and conveyor systems
-
Counting, sorting and grouping
-
Product routing and line merging
-
Shrink packaging
-
Case forming and case packing
-
Labeling and print-and-apply applications
-
Robotic product handling and placement
-
Robotic palletizing
-
Machine-to-machine control and signal connections
The objective is to combine the required operations in the correct sequence and at the required capacity, allowing the product flow to continue smoothly through the packaging stage.
How Do We Engineer a Packaging Line?
At the beginning of a project, we evaluate the existing production structure, product characteristics and target packaging method. Production output, product dimensions, existing equipment and available plant space form the main project data.
1. Product and Capacity Analysis
Product dimensions, weight, production output, shift pattern and target packaging capacity are defined. Equipment that will remain in use is also evaluated in terms of operating method and capacity.
2. Line Structure and Equipment Selection
The required units for product transfer, packaging, case packing, labeling and palletizing are defined. Equipment is selected according to the complete product flow rather than the capacity of a single machine.
3. Line Layout
The line layout is prepared in CAD, taking machine dimensions, product infeed and discharge directions, operator access and maintenance areas into account.
4. Production and System Preparation
Machines and auxiliary equipment are manufactured or supplied according to the approved project plan. Control and signal connections between the units are also prepared at this stage.
5. FAT – Factory Acceptance Test
Before shipment, the system is checked against the agreed operating conditions during FAT. Where applicable, tests are carried out with the actual product and packaging materials.
6. Installation and Commissioning
Mechanical and electrical connections are completed on site, and the line is commissioned under actual production conditions. Operator training and technical checks are completed before the system enters production.
What Information Is Needed to Start a Packaging Automation Project?
A detailed technical specification is not required for the initial evaluation. Basic information about the product, production capacity and existing process is usually sufficient to begin.
-
Product photo or video
-
Product dimensions and weight
-
Production output per minute or hour
-
Required pack format
-
Current packaging method
-
Existing machines and conveyors that will remain in use
-
Approximate available space for the packaging line
-
Storage or shipping method after packaging
-
Packaging material and case dimensions, if available
This information allows us to evaluate product flow, required packaging steps and capacity needs. Additional technical details are clarified during the project discussions.
We Plan Packaging Automation Around the Structure of Your Production Line
In some applications, automating the product transfer between the production line and the packaging machine is sufficient. In others, products from several production lines may need to be collected, grouped, packed, case packed and palletized.
Existing equipment can remain part of the system when it is technically suitable. New equipment requirements are determined by evaluating capacity, product characteristics, operating method and plant layout.
The project scope is defined according to the operations that are actually required in production, not according to how many machines can be added to the line.
What Does Packaging Automation Add to Production?
A properly configured packaging automation system:
-
eliminates product accumulation before packaging,
-
balances production and packaging capacities,
-
reduces repetitive manual handling and placement,
-
supports consistent packaging quality under the same operating conditions,
-
enables regular transfer of products into storage and dispatch operations,
-
allows personnel to focus more on production monitoring and control instead of repetitive physical tasks.
Packaging Automation Applications
Packpark® packaging automation applications include:
-
Shrink packaging lines
-
Product transfer and conveyor systems
-
Automatic case forming and case packing
-
Robotic product handling and placement
-
Robotic palletizing systems
-
Labeling and print-and-apply applications
-
Line merging, routing and grouping systems
-
E-commerce packaging systems
-
uPVC and aluminium profile packaging lines
-
White goods shrink packaging lines
The application structure is determined by the product, production capacity, existing line configuration and plant layout.
Frequently Asked Questions
Can packaging automation be added to an existing production line?
The capacity of the existing machines, product discharge method, signal infrastructure and plant layout are evaluated to determine where new packaging equipment can be connected to the line.
Can existing packaging machines remain in use?
Equipment that is technically suitable can remain in the system. New units are incorporated into the project according to the operating conditions and capacity of the existing machines.
How is packaging capacity determined?
The actual output of the production line is taken as the starting point. Product type, pack format, machine cycle times, product transfer and possible short stops are evaluated together to determine the required packaging capacity.
Why is FAT carried out?
FAT is carried out before shipment to verify that the equipment meets the agreed functions and operating conditions. Where applicable, tests are performed with the customer’s product and packaging materials.
Is a robot required for packaging automation?
Robotic systems are used when they are technically and economically suitable for product handling, placement or palletizing. In some packaging lines, conveyor-based and conventional automation equipment provide the more appropriate solution.
Can packaging automation be installed within an existing factory layout?
Machine dimensions, product flow, operator access, maintenance areas and existing plant conditions are evaluated during layout planning. Equipment positions are determined according to these parameters.
Let’s Discuss Your Project
You can share your product details, production output and current packaging method with us.
During the first discussion, we evaluate the product flow and packaging steps and define the technical information required for the project study.
Detailed drawings or a complete technical specification are not required to begin. Basic information about the product and the current production setup is usually sufficient.
Packaging Automation Applications

Let’s Review Your Packaging Requirements
Share your product dimensions, target capacity and current packaging method. Our technical team will evaluate the product flow and the applicable machine and automation structure.








